Fddi Mac Notcopiedthreshold - 3Com SuperStack II 9300 Command Reference Manual

C 8: F D
238
HAPTER IBER
fddi mac
notCopiedThreshold
3500
9000
9400
3900
9300
D I
ISTRIBUTED ATA NTERFACE
Sets the timing when the system generates a MAC condition report
because too many frames could not be copied.
Valid Minimum Abbreviation
fd m n
Important Considerations
Not-copied frames occur when there is no buffer space available in the
station (which in turn indicates congestion in the station).
You can use this command to configure the same setting on multiple
ports simultaneously. When you specify multiple port numbers, the
system prompts you to choose the setting and then applies it to all of
the ports.
Options
Prompt
Ports
notCopiedThreshold Time value set to
(FDDI)
Description
One or more FDDI station
ports for which you want
to set the mac
notCopiedThreshold
determines when the
system generates a MAC
condition report because
too many frames could
not be copied
Possible Values [Default]
Any of the –
available
ports on the
installed FDDI
modules
all
0 – 4294967295 6550
microseconds