Bridge Trunk Define - 3Com SuperStack II 9300 Command Reference Manual

bridge trunk define

3500
9000
9400
3900
9300
Defines one or more trunks on the system. When you define a trunk, you
specify ports and characteristics for the trunk.
Valid Minimum Abbreviation
b t def
Important Considerations
If you have more than one media type on your system (for example,
Fiber Distributed Data Interface (FDDI), Fast Ethernet, and Gigabit
Ethernet), you are prompted for a media type before you are
prompted for the trunk information.
All links to be trunked must be homogeneous. For example, you
cannot mix Fast Ethernet and Gigabit Ethernet links in a trunk.
If you have already defined other trunks on your system, you cannot
select ports that are part of an existing trunk.
In general, create trunks before you define your virtual LANs (VLANs).
If you create a trunk whose ports are part of existing VLANs, the VLAN
bridge port configuration changes. For example, if you have the
default VLAN as well as IP VLANs and you then define a trunk with
ports in one of the IP VLANs, the system removes those ports from
that VLAN and places them in the default VLAN. You must modify the
VLAN and add the new bridge ports to the appropriate VLAN. This
situation does not apply if you have only the default VLAN (all ports
are part of the default VLAN).
When you define a VLAN to include trunk ports, specify the anchor
port (lowest-numbered port) that is associated with the trunk.
Do not use Gigabit Ethernet (GEN) Interface modules (such as the
2-port 1000BASE-SX Gigabit Ethernet (GEN) Interface Module) when
defining trunks.
Enter to see the port summary (for example, to indicate whether
?
there are ports associated with FDDI Dual Attach Station (DAS) pairs),
and then enter the appropriate port numbers. To specify an FDDI DAS
pair, specify the lowest-numbered port in the DAS pair.
The number of trunk groups and the number of ports within a trunk
group depend on your system. See the Options table.
The 3CB9FG24T switch fabric module supports up to 12 trunk groups
on the CoreBuilder 9000.
bridge trunk define 307