Fiber Distributed Data Interface (Fddi); Fddi Station Display - 3Com SuperStack II 9300 Command Reference Manual

C 8: F D
224
HAPTER IBER

fddi station display

3500
9000
9400
3900
9300
D I
ISTRIBUTED ATA NTERFACE
Displays FDDI station information. The system display shows the station
configuration, status reporting, and the most pertinent statistics about
general station activity and errors.
Valid Minimum Abbreviation
fd station d
Fields in the FDDI Station Display
Field
configuration
connectPolicy
ecmState
ports
remoteDisconnect
stationID
statusReporting
tnotify
traceMaxExp
(FDDI)
Description
Attachment configuration for the station or concentrator.
Values can be Thru, Isolated, Wrap_A, and Wrap_B.
Bit string that represents the connection policies in effect
on a station. How connection policies translate into bits is
described in "fddi station connectPolicy" in this chapter.
This value is user-defined.
Current state of the ECM state machine.
Ports numbers assigned to the FDDI module. The FDDI
port numbers change depending on the configuration of
your system.
Flag indicating that the station was remotely disconnected
from the network as a result of receiving an
fddiSMTAction with the value of disconnect in a
Parameter Management Frame (PMF). A station requires a
Connect Action to rejoin the network and clear the flag.
Unique identifier for the FDDI station.
Whether a station generates Status Report Frames (SRFs)
to report events and conditions to network management
stations. This value is user-defined.
Timer used in the Neighbor Notification protocol to
indicate the interval of time between generation of
Neighbor Information Frames (NIF). This value is
user-defined.
Maximum propagation time for a trace on an FDDI
topology. Places a lower bound on the detection time for
an unrecovering ring.