Bridge Mpla Peermacaddress - 3Com SuperStack II 9300 Command Reference Manual

C 12: M
326
HAPTER ULTI
bridge mpla
peerMacAddress
3500
9000
9400
3900
9300
P L A (MPLA)
OINT INK GGREGATION
Specifies the MAC address of the out-of-band management port of the
attached CoreBuilder 9400 switch in the MPLA core (the peer core
switch).
Valid Minimum Abbreviation
b mp p
Important Considerations
You execute this command on each of the two CoreBuilder 9400
switches in the MPLA core.
In each core switch, you use this command to specify the MAC
address for the out-of-band management port of the attached peer
switch.
You must use this management port to connect a crossover Ethernet
cable to the out-of-band management port on the switch you are
presently configuring.
The input format for this MAC address is
00-00-00-00-00-00