System Console Security Define - 3Com SuperStack II 9300 Command Reference Manual

C 3: S
78
HAPTER YSTEM
system console
security define
3500
9000
9400
3900
9300
E
NVIRONMENT
Gives a client trusted access to your system by adding the client IP address
and subnet mask to an access list.
Valid Minimum Abbreviation
sy co se de
Important Considerations
CAUTION: Be careful when you define trusted IP clients. If you specify an
incorrect IP address or subnetwork address when you define a trusted IP
client, you can affect your own ability to access the system. See the
Implementation Guide for your system.
Configure trusted IP clients in this order:
Define the trusted IP clients using
.
define
Display the list of configured trusted IP clients using
console security display
trusted IP clients correctly.
Enable the system to verify trusted IP clients using
security access
You can configure up to five IP addresses or five subnetwork addresses
as trusted IP clients.
An IP address or subnetwork address can be used to access the system
only if it is on the trusted IP client list.
Use the subnet mask to allow trusted access to all addresses on a
particular subnetwork. Examples: The IP address 158.99.112.219
with a subnet mask of 255.255.255.0 allows trusted access to all
addresses on the 158.99.112 subnetwork. The IP address
158.99.112.219 with a subnet mask of 255.255.255.255 allows
access only by the single IP address 158.99.112.219.
The trusted IP client information is retained after a system reboot; that
is, it is saved in nvData.
system console security
to verify that you have configured the
.
system
system console