3Com SuperStack II 9300 Command Reference Manual page 731

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

Prompt
Description
Service level
Service level for excess/policed
for excess
traffic. Low is recommended.
/policed traffic
This setting applies to the
excess traffic with the reserved
bandwidth (that is, which
queue it should be placed in).
Excess Loss
Whether excess packets are
Eligible
loss-eligible
Procedure
1 Enter the maximum total reservable bandwidth, using a percentage of
the output link (a value of from 0 through 200 , with 50 as the default).
2 Enter the maximum per-reservation bandwidth, using a percentage of the
output link (a value of from 0 through 100 , with 50 as the default).
3 Enter the policing option (edge, always, or never, with edge as the
default).
4 Enter the service level for excess/policed traffic (best or low, with low
as the default).
5 Specify whether excess packets are loss eligible (yes or no, with no as
the default).
qos rsvp enable
Possible Values [Default]
best
low (factory
default)
low
yes
no (factory
default)
no
731

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents