Bridge Multicast Igmp Groups - 3Com SuperStack II 9300 Command Reference Manual

bridge multicast igmp
groups
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 2 switching modules only.
Displays IP multicast group and associated port information for a selected
VLAN.
Valid Minimum Abbreviation
b mu i g
Important Considerations
For the CoreBuilder 3500 system and CoreBuilder 9000 Layer 3
modules, IGMP commands exist under the ip multicast igmp
menu.
If no IP multicast group traffic is present on the selected VLAN, you see
this message:
No groups exist for this VLAN
Options
Prompt Description
VLAN ID ID number of the VLAN
for which you want to
display group and port
information
Fields in the Bridge Multicast IGMP Groups Display
Field
VLAN ID
Group
IpAddress
Ports

bridge multicast igmp groups

Possible Values
A valid VLAN ID
(VID) number
? (for a list of
selectable VIDs)
Description
ID number of the selected VLAN.
Hexidecimal equivalent of the IP multicast group address
shown in the IpAddress column.
IP multicast group address of the traffic that the system or
module has observed on the selected VLAN.
Ports that lead to group members.
275
[Default]
1 (Default VLAN)