System Nvdata Reset - 3Com SuperStack II 9300 Command Reference Manual

system nvData reset

3500
9000
9400
3900
9300
Resets the system values to the factory defaults. You can then reconfigure
the system from its original settings.
Valid Minimum Abbreviation
sy nv rese
Important Considerations
You are not permitted to perform an NV data reset from a Telnet
session. An NV data Reset over Telnet clears all of your configurable
information, including the IP interface of the box, and prevents you
from managing the system without a direct console connection.
If you enter (no) when you are prompted to confirm the reset, the
n
system displays the previous menu.
CAUTION: As a precaution, consider saving the existing NV data to a file
before you reset all values to the factory defaults. Resetting NV data
means that NV memory is set back to the factory defaults (except for the
serial port baud rate, modem baud rate, and system boot parameters).
Before you proceed, be sure that you want to reset your NV data.
Options
Prompt Description
Do you wish Confirmation of the reset
to operation. (You may not want
continue? to reboot because resetting
nonvolatile data may leave the
system in an inconsistent state,
so the system reboots after
each reset.)
system nvData reset
Possible Values [Default]
n (no) y
y (yes)
113