Qos Rsvp Enable - 3Com SuperStack II 9300 Command Reference Manual

C 22: Q
730
HAPTER UALITY OF

qos rsvp enable

3500
9000
9400
3900
9300
S (Q S) RSVP
ERVICE O AND
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Enables RSVP on the system RSVP settings that you specify.
Valid Minimum Abbreviation
q r e
Important Considerations
By default, RSVP is disabled.
In general, when you enable RSVP, use the default settings.
You are allowing RSVP to reserve this amount of bandwidth in the
system. You can oversubscribe (over 100) and specify a value of up to
200.
Options
Prompt Description
Maximum total Admission control policy. RSVP
reservable begins to refuse reservations
bandwidth when the requested
bandwidth on an output link
exceeds the total reservable
bandwidth.
Maximum per- Largest reservation that RSVP
reservation attempts to install.
bandwidth
Policing option When to drop excess packets.
Edge policing drops excess
packets only at the edge (that
is, when traffic has not yet
passed through any network
device that has already
performed policing for that
flow).
With edge , the system
polices the flow when RSVP
requests it.
With always , the system
polices the flow regardless
of whether RSVP requests
it.
With never , the system
never polices the flow even
if RSVP requests it.
Possible Values [Default]
0 – 200 percent 50 (factory
default)
0 – 100 percent 50 (factory
default)
edge edge (factory
default)
always
never