Ip Rip Policy Detail - 3Com SuperStack II 9300 Command Reference Manual

C 16: I
464
HAPTER NTERNET

ip rip policy detail

3500
9000
9400
3900
9300
P (IP)
ROTOCOL
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays detailed information about RIP routing policies.
Valid Minimum Abbreviation
ip ri pol det
Important Considerations
This display contains the summary information and two additional
fields: Interface and Metric.
Route policies are classified as follows:
Import policies import routing information from what RIP learns
from a router/neighbor to the unified routing table. (You can also
import routing information from Open Shortest Path First (OSPF).)
Export policies send information from the routing table to RIP and
RIP routers, which controls what is going out on the wire to the RIP
domain. (You can also export from the routing table to OSPF.)
Fields in the IP RIP Policy Detail Display
Field Description
Action Action for the route — accept or reject
Index Index number of the policy
Interface Interface that is associated with the policy (all applies to
all interfaces)
Metric Assigned metric, a value 0 through 16 for RIP-1 or RIP-2
(metrics can use options +, -, /, *, and %)
Protocol Protocol (for example, RIP)
Route Route that the policy affects
Source Source router (all is from all routers)
Type Whether the policy is an import or export policy
Weight Administrative weight — 1 through 16