Ipx Sap Mode - 3Com SuperStack II 9300 Command Reference Manual

C 20: IPX
638
HAPTER

ipx sap mode

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Selects a Service Advertising Protocol (SAP) mode that is appropriate for
your network.
Valid Minimum Abbreviation
ipx sa m
Important Considerations
SAP provides routers and servers that contain SAP agents with a
means of exchanging network service information.
The system has three SAP modes:
Off — The system does not process any incoming SAP packets and
does not generate any SAP packets of its own.
Passive — The system processes all incoming SAP packets and
responds to SAP requests, but it does not broadcast periodic or
triggered SAP updates.
Active — The system processes all incoming SAP packets,
responds to explicit requests for routing information, and
broadcasts periodic and triggered SAP updates.
Options
Prompt Description
SAP mode Whether the system processes
SAP packets
Possible Values [Default]
off disabled
(factory
passive
default), or
active current
value