Ip Rip Policy Define - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for SuperStack II 9300:

Table of Contents

ip rip policy define

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Defines an import or export route policy for RIP.

Valid Minimum Abbreviation

ip ri pol def

Important Considerations

Route policies are classified as follows:

Import policies import routing information from what RIP learns

from a router/neighbor to the unified routing table. (You can also

import routing information from Open Shortest Path First (OSPF).)

Export policies send information from the routing table to RIP and

RIP routers, which controls what is going out on the wire to the RIP

domain. (You can also export from the routing table to OSPF.)

The system assigns an index number to each policy and takes into

account all route policies set on the system, RIP and OSPF (You can

define up to 128 routing policies total, shared between OSPF and RIP

Certain conditions are associated with import and export policies. See

the import and export policy tables that follow the Options table for

lists of the conditions.

You can set up an IP RIP or OSPF import or export policy to accept or

advertise the default route, as long as the default route exists in the

routing table. When you define a policy, you are always prompted for

the route subnet mask after the route address, regardless of whether

you specify the wildcard route address of 0.0.0.0. For more

information about the default route and routing policies, see the

CoreBuilder 3500 Implementation Guide or the CoreBuilder 9000

Implementation Guide.

ip rip policy define