3Com SuperStack II 9300 Command Reference Manual page 712

C 22: Q
712
HAPTER UALITY OF
S (Q S) RSVP
ERVICE O AND
Prompt Description
How rate limit For receivePort or aggregate
is expressed rate limit types, in KBytes/sec
or percentage.
Rate limit value For receivePort or aggregate
rate limit types, in KBytes/sec
or percentage.
0 makes all packets excess
packets.
Burst size For receivePort or aggregate
rate limit types, the maximum
amount of data in Kbytes that
you can transmit at the line
rate before the transmission is
policed.
Bridge ports Receive ports for which you
want to enable the rate limit. If
you specify a subset of ports,
you can specify multiple rate
limit values.
On the CoreBuilder
list of ports includes the
front-panel ports and any
enabled backplane ports.
802.1p tag IEEE 802.1p priority tag value
to apply to forwarded frames
(for both flow and nonflow
classifiers).
Apply another If you specified a subset of
rate limit? available ports, whether you
want to define another rate
limit for other ports.
TCP drop Whether one-way filtering is
control used so that drop packets
enabled establish a TCP connection.
(flow classifiers
only)
Start and end Whether you want to set
times starting and ending times for a
control.
Possible Values
KBytes/sec
percentage
0 – 65434
KBytes/sec
0 – 100
percent
16 – 8192 KBytes Determined
Any subset of
selectable
ports
all
? (for a list of
®
9000, the
selectable
ports)
0 – 7
none
? (for a list of
selectable
values)
y (yes)
n (no)
y (yes)
n (no)
y (yes)
n (no)
[Default]
KBytes/sec
(factory
default)
–
by your
specified rate
limit
Selectable
ports
none (factory
default)
n
n
n