Ethernet Portstate - 3Com SuperStack II 9300 Command Reference Manual

C 7: E
220
HAPTER THERNET

ethernet portState

3500
9000
9400
3900
9300
P
ORTS
Enables or disables Ethernet ports, controlling whether the ports send or
receive frames.
Valid Minimum Abbreviation
e ports
Important Consideration
When an Ethernet port is
over that port. When an Ethernet port is
sends nor receives frames.
Options
Prompt Description
Port Ports that you want to enable
or disable
Port state Value shown in the summary
and detail displays reports:
on-line for all enabled ports
displayed and off-line for
all disabled ports displayed
Procedure
1 To enable or disable an Ethernet port, from the top level of the
Administration Console, enter:
ethernet portState
2 At the prompt (for example,
state values you want to set, or to display a port summary, specify
3 Enter or
enabled disabled
The value shown in the summary and detail displays reports
portState
for all enabled ports that are displayed and
on-line
disabled ports. The Port Status LED for each disabled port on the module
indicates the disabled status.
, frames are transmitted normally
enabled
disabled
Possible Values
Individual ports
A range of port
numbers
all
? (to display a
port summary)
enabled
disabled
), enter the ports whose port
(1-24|all|?)
for each Ethernet port.
, the port neither
[Default]
–
enabled
?
for all
off-line