Ipx Rip Triggered - 3Com SuperStack II 9300 Command Reference Manual

ipx rip triggered

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Sets the RIP Triggered update mode, which dictates when the IPX
protocol broadcasts newly learned routes.
Valid Minimum Abbreviation
ipx ri t
Important Considerations
The system has two RIP triggered modes:
Disabled — Broadcasts IPX routes 3 seconds after learning them.
Enabled — Broadcasts IPX routes immediately after learning them.
Options
Prompt Description
Triggered Mode that determines when IPX
update mode broadcasts newly learned routes
ipx rip triggered
Possible Values [Default]
disabled enabled
enabled
631