Access Examples - 3Com SuperStack II 9300 Command Reference Manual

Access Examples

Select menu option: system
Menu options (CoreBuilder-2B4200): ---------------------------------------------
display
console
fileTransfer
snapshot
softwareUpdate
baseline
serialPort
name
time
nvData
clearDiagBlock
diagErrLog
sntp
reboot
Type "q" to return to the previous menu or ? for help.
--------------------------------------------------------------------------------
Select menu option (system):
The examples in this section show how the top-level menu structure of
the Administration Console changes. The menus that you see in the
Administration Console vary depending on:
Which 3Com system you are viewing (as described in "Accessing Your
System" earlier in this chapter).
Your level of access.
The optional interface modules, switch fabric modules, and other
hardware options that you configure into your system. For example,
you see the fddi menu only if you have installed the FDDI module on
your CoreBuilder 3500 system.
These examples show the CoreBuilder 3500 menus. Menus for other
platforms may differ. See the Command Quick Reference for your system
for the list of commands on your system.
Administer Access Example
When you enter the Administration Console with Administer access, each
menu contains all of the options for the system. Here is an example of a
system menu for users with Administer access on the CoreBuilder 3500:
- Display the system configuration
- Administer console-level functions
- Set the file transfer protocol
- Display all configuration and status information
- Load a new revision of system software
- Administer a statistics baseline
- Administer the terminal and modem serial ports
- Set the system name
- Set the date and time
- Save, restore, or reset nonvolatile data
- Clear the diagnostic block
- Display Diagnose Error Log
- Administer the Simple Network Time Protocol
- Reboot the system
Access Examples 37