Ip Udphelper Interface First - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

ip udpHelper
interface first
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Configures UDP Helper to support overlapped IP interfaces by using the
first interface.
Valid Minimum Abbreviation
ip u i f
Important Considerations
Overlapped IP interfaces are multiple logical interfaces that are defined
for a single physical port. You can specify how UDP Helper forwards
packets from overlapped IP interfaces with one of three interface
options (
,
first
even
The value
directs the system to use the first overlapped IP
first
interface as the source network for forwarded packets.
The system implements your selection immediately. You can view the
UDP Helper configuration when you configure the forwarding
address.

ip udpHelper interface first

, or
).
sequential
447

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents