3Com SuperStack II 9300 Command Reference Manual page 636

C 20: IPX
636
HAPTER
Prompt Description
Metric Increase or decrease a route
adjustment metric by a value that you
specify. Specify an integer and
an operand (+,-,*,/,%) to
adjust the metric value, This
parameter is valid only if the
Policy Action is set to Accept.
Weight Metric value of this policy. This
parameter specifies the order
of precedence for policies that
match the same route. A
higher value takes precedence
over a lower value.
IPX RIP Policy Modify Example
Select menu option (ipx/rip/policy): modify
Select policy {1|?}:1
Enter route origin (static,rip,all) [all]:rip
Enter route address (0x1-0x1fffffffe|all) [all]:
Select IP interfaces (2|all?) [all]:
Enter the source node address [all]:
Enter the policy action (accept, reject) [accept]:
Enter the metric adjustment ([+,-,*,/]0-16) [0]:
Enter the administrative weight (1-16) [1]:
Possible Values [Default]
0-16 0 (does not
change the
+ (add)
metric)
- (subtract)\
* (multiply)
/ (divide)
% (modulo -
remainder of
integer division)
1 – 16 1