Management Ip Interface Summary - 3Com SuperStack II 9300 Command Reference Manual

C 5: O -O
156
HAPTER UT
management ip
interface summary
3500
9000
9400
3900
9300
-B M
F AND ANAGEMENT
Displays a summary table about the out-of-band system IP management
interface configuration, including parameter settings.
Valid Minimum Abbreviation
m ip i sum
Fields in the Management IP Interface Summary Display
Field
Index
IP address
IP routing status
RIP status
State
Subnet mask
Type
Description
Unique number that identifies the out-of-band interface
IP address of the out-of-band interface, chosen from the
range of addresses that the central agency assigned to
your organization. This address is specific to your network
and system.
Whether the interface is available to route IP traffic
(enabled) or not (disabled)
Whether RIP is dynamically configuring its routing tables
(active) or on request (passive)
State of the IP interface, indicating whether the interface
is available for communications (up) or unavailable
(down).
32-bit number that uses the same format and
representation as an IP address. The subnet mask
determines which bits in the IP address are interpreted as
the network number, the subnet number, and the host
number. Each IP address bit that corresponds to a 1 in the
subnet mask is in the network/subnet part of the address.
Each IP address bit that corresponds to a 0 is in the host
part of the IP address.
Type of device that is connected to the interface