3Com SuperStack II 9300 Command Reference Manual page 353

Options
Prompt Description
VID Unique, user-defined integer
used by global management
operations
Bridge ports Index numbers of the bridge
ports that belong to the VLAN. If
you include trunked ports,
specify the anchor port of the
trunk. See "Important
Considerations" for information
about the list of ports.
Per-port Whether you want to configure
tagging 802.1Q VLAN tagging. You are
prompted to answer for each
port that you selected.
Tag type Whether you want no tagging or
IEEE 802.1Q tagging (the VID).
For a port shared by another
VLAN, verify that the specified
tag type is not in conflict with the
port's tag type in another VLAN.
VLAN name Unique, user-defined name that
identifies members of the VLAN.
(for VLANs
If you use spaces, put quotation
other than
marks around the VLAN name.
the default)
Procedure
Press Return or Enter to accept the default or existing values that appear
in brackets [ ].
1 Enter the VLAN identification (VID) number.
2 Enter one or more port numbers. To assign all ports to the VLAN, enter
all
3 Configure the per-port tagging.
bridge vlan define (3900/9300/9400/ 9000 Layer 2)
Possible Values [Default]
If the default Next available
VLAN exists, VID
2– 4094
If the default
VLAN does not
exist, 1 to
redefine the
default VLAN,
or 2–4094 for
other VLANs
One or more of –
the ports that
are available to
be assigned to
the VLAN
all
? (for a list of
selectable ports)
y (yes) y
n (no)
none none
802.1Q
Up to 32 ASCII –
characters or
spaces
353