Ip Interface Icmpredirect - 3Com SuperStack II 9300 Command Reference Manual

ip interface
icmpRedirect
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Enables or disables the transmission of an Internet Control Message
Protocol (ICMP) redirect to the sender of a frame to indicate that there is
a better gateway available to handle the frame than this routing
interface.
Valid Minimum Abbreviation
ip i icmpre
Important Considerations
The software determines whether there is a better path for the frame
by determining whether the source interface is the same as the
destination interface and whether the frame's sender is on a directly
connected network. If the software determines that a received frame
has a better path available through another gateway:
It sends an ICMP redirect message back to the originator of the
frame indicating the better gateway to use in the future
It routes the frame to the gateway
ICMP redirect can be set on a per-interface basis.
For better performance or if you have applications that ignore ICMP
redirects, disable the ability of the interface to send ICMP redirects.
If you have two interfaces that belong to virtual LANs (VLANs) that
share a given port and you want to completely disable ICMP redirects
for that port, disable the redirects for each interface that shares that
port. If you disable it for only one interface and enable it for the other,
you may not get the performance improvement that you want.

ip interface icmpRedirect

413