Management Ip Arp Display - 3Com SuperStack II 9300 Command Reference Manual

C 5: O -O
168
HAPTER UT
management ip arp
display
3500
9000
9400
3900
9300
-B M
F AND ANAGEMENT
Display the contents of the Address Resolution Protocol (ARP) cache for
each interface on the system.
Valid Minimum Abbreviation
m ip ar d
Important Considerations
The system uses the ARP cache to find the MAC addresses that
correspond to the IP addresses of hosts and other routers on the same
subnets. Each device that participates in routing maintains an ARP
cache , which is a table of known IP addresses and their corresponding
MAC addresses.
The first line in the output (the status line) indicates whether IP routing
is enabled (in-band only):
IP interface options (such as ICMP router discovery) appear under
ip interface detail
second status line indicates the number of entries in the ARP
cache.
Fields in the Management IP ARP Display
Field
Hardware address
IP address
Type
and are set on a per-interface basis. The
Description
MAC address that is mapped to the IP address
IP address of the interface
Type of entry, static or dynamic