3Com SuperStack II 9300 Command Reference Manual page 211

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

Field
Description
txFrameRate
Average number of frames that were transmitted per second by
this port during the most recent sampling period. Sampling
periods are 1 second long and not configurable.
txFrames
Number of frames that were transmitted by this port.
txInternalErrs
Number of frames that were discarded because of an internal
error during transmission.
txMcastsOnly
Number of multicast frames transmitted by this port.
(3900, 9000
Layer 2, 9300 and
9400)
txMulticasts
Number of multicast frames that were queued for transmission
from this port by a higher-level protocol or application,
including frames not transmitted successfully.
txPeakByteRate
Peak value of ethernetPortByteTransmitRate for this port since
the station was last initialized.
txPeakFrameRate
Peak value of ethernetPortFrameTransmitRate for this port since
the station was last initialized.
txQOverflows
Number of frames lost because transmit queue was full.
txUnicasts
Number of unicast (nonmulticast) frames that are queued for
transmission by a higher-level protocol or application, including
frames not transmitted successfully.
vendorName
Vendor name for a GBIC module. Other modules display n/a.
(3500)
ethernet detail
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents