Qos Bandwidth Modify - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for SuperStack II 9300:

Table of Contents

qos bandwidth

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Sets how to weigh the high priority and best effort transmit queues, and

sets RSVP bandwidth for the control queue. Low priority packets do not

have bandwidth explicitly allocated.

Valid Minimum Abbreviation

Important Considerations

When you enter the command, the system prompts you to enter the

percentage of bandwidth to use for high-priority traffic on the output

The value 75 specifies that three high-priority packets are transmitted

for each best effort packet.

The value 50 sets equal priority for high priority and best effort

The value 100 is strict prioritization; it allows best effort packets to be

sent only when no high priority packets need to be sent.

Percentage of

Percentage of bandwidth that

you want to be used for

high-priority traffic on the

Possible Values [Default]

0 – 100 percent