Corebuilder 9000 Management Features; Eme Overview - 3Com SuperStack II 9300 Command Reference Manual

CoreBuilder 9000
Management
Features

EME Overview

You can manage the CoreBuilder 9000 system through a terminal
interface, through the Simple Network Management Protocol (SNMP),
and through the 3Com Transcend
the primary communication mechanism into the chassis and modules.
You manage other intelligent modules within the chassis through the
EME.
The EME is an SNMP-based network management module that manages
and controls the 3Com CoreBuilder 9000 chassis and its modules. The
EME has the following features:
Chassis Management Architecture — Provides a cost-efficient
management architecture that:
Provides a central point of contact for chassis management
Provides all controller functions, as well as EME functions
Intelligent Power Management — Manages power use in the
chassis by:
Preventing newly installed modules from receiving power when
there is not enough power available
Allowing you to prioritize the order in which modules power off (if
there is insufficient power available)
Allowing you to implement fault-tolerant power, which allows the
chassis to reserve some of its power capacity to protect against a
power supply failure
In the chassis:
The EME exchanges information with all modules through the MLAN.
Interface modules pass data through the switch fabric module.
On modules that include their own agent, the EME "connects" to that
module and then you can use the Administration Console
management interface to manage that module.
EME Overview
®
Network Control Services. The EME is
33