System Serialport Modemspeed - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for SuperStack II 9300:

Table of Contents

system serialPort

Sets the port speed for the modem port to match your external modem

baud setting.

Valid Minimum Abbreviation

Important Considerations

After you use this command, you must establish a connection

between your current Console session and the modem port before

you dial in. (See "system serialPort configModem" later in this chapter

for details.)

Be sure that the baud setting of the modem port matches that of your

external modem.

The system immediately changes the modem port baud setting.

Signal speed for the

system serialPort modemSpeed

Possible Values