Ip Ospf Linkstatedata External - 3Com SuperStack II 9300 Command Reference Manual

ip ospf linkStateData
external
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays external network link state advertisements (LSAs) in the link state
database.
Valid Minimum Abbreviation
ip o l e
Important Consideration
To view link state database information, OSPF must be
active (enabled).
Options
Prompt Description
LSID Link State ID (in the form of the
destination network's IP
address)
LSID mask Link State ID bit mask
(Example 255.0.0.0)
Fields in the IP OSPF Link State Data External Display
Field
Fwd Address
LS Age
LS Seq
LSID
Metric
Network Mask
Router ID
RouteTag
Type

ip ospf linkStateData external

Possible Values
Valid IP address
Link State ID bit
mask
Description
Forwarding address for data traffic to the advertised
destination
Time (in seconds) since LSA was originated
Sequence number of the LSA (used to detect older
duplicate LSAs)
IP network number
Cost to reach advertised destination
IP address mask for the advertised destination
Originating router ID
Not used by OSPF; these 32 bits may be used to
communicate other information between boundary
routers. Tag contents are defined by applications.
Type 1 — normal link state metric
Type 2 — metric is larger than any local link state
path
563
[Default]
0.0.0.0 (factory
default), or
current value
0.0.0.0 (factory
default), or
current value