Ip Ospf Stubdefaultmetric Display - 3Com SuperStack II 9300 Command Reference Manual

ip ospf
stubDefaultMetric
display
3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays the stub default metric value for an area border router.
Valid Minimum Abbreviation
ip o stu di
Important Considerations
The stub default metric value determines if the router generates the
default route into the stub areas of the network. This value applies to
area border routers (ABRs) that have attached stub areas.
If a stub default metric is not defined, the router does not advertise a
default route into the attached stub area.
By default, the
stub default metric
Field in the IP OSPF Stub Default Metric Display
Field Description
Stub default Currently defined OSPF stub default metric
metric

ip ospf stubDefaultMetric display

is not defined.
571