3Com SuperStack II 9300 Command Reference Manual page 306

C 11: T
306
HAPTER RUNKS
Field
TCMP
Tcmpstate
Trunk state
txFrames
txHellos
Type
Description
Whether TCMP is enabled or disabled for the trunk.
TCMP state for each port in the trunk:
notInUse — Not selected for use in the trunk
selected — Selected for use in the trunk, but not
yet active in the trunk
inUse — Active in the trunk
State (up or down) of each port link in the trunk.
Number of TCMP messages that were transmitted on
each port.
Number of TCMP helloMessages that were transmitted on
each port.
The network type that you assigned to the ports in the
trunk (for example, FDDI, Fast_Ethernet, or
Gigabit_Ethernet).