Ip Routing - 3Com SuperStack II 9300 Command Reference Manual

C 16: I
450
HAPTER NTERNET

ip routing

3500
9000
9400
3900
9300
P (IP)
ROTOCOL
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Controls whether the system forwards or discards IP packets that are
addressed to other hosts.
Valid Minimum Abbreviation
ip routi
Important Considerations
When you enable IP routing, the system acts as a standard IP router: it
forwards IP packets from one subnetwork to another when required.
When you disable IP routing, the system discards any IP packets that
are not addressed directly to one of its defined IP interfaces.
By default, IP routing is
Options
Prompt Description
IP routing state Whether IP routing is
implemented on the
system
on the system.
disabled
Possible Values
enabled
disabled
[Default]
disabled