3Com SuperStack II 9300 Command Reference Manual page 668

C 21: A
668
HAPTER PPLE
T
ALK
Prompt Description
Start of Start of the network range that
network is associated with the seed
range interface. Seed interfaces only .
End of End of the network range that
network is associated with the seed
range interface. Seed interfaces only .
Default User-defined default AppleTalk
zone name zone name. Clients that have
not been configured to use a
particular zone use the default
zone name. Seed interfaces
only .
Zone name First AppleTalk zone that is
associated with the interface.
You are then prompted to
enter up to 15 additional zone
names. Seed interfaces only .
VLAN Index number of the VLAN that
interface you want to associate with the
index AppleTalk interface. When the
system prompts you for a
VLAN interface index, it
indicates the available VLANs
that you can associate with a
new AppleTalk interface.
Interface Number of minutes that you
down time want to bring down the
AppleTalk interface after you
change zone information. This
prompt appears only when you
modify the zone information
that is associated with the
interface.
Possible Values [Default]
1 – 65279 Current value
1 – 65279 Current value
Up to 32 ASCII Current value
characters
Up to 32 ASCII Current value
characters
q (to quit
specifying zone
names and
move on to the
VLAN interface
index prompt)
Available valid Current value
VLAN index
number
? (for a list of
selectable
indexes)
1 – 120 minutes –