Ip Ospf Interface Dead - 3Com SuperStack II 9300 Command Reference Manual

ip ospf interface dead

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Specifies the dead interval for an interface.
Valid Minimum Abbreviation
ip o i dea
Important Consideration
Set the dead interval to the same value for all routers on the network.
Options
Prompt Description
IP interface Index number of one or more
interfaces on which you want
to set the dead interval
Dead Maximum duration (in
interval seconds) that neighbor routers
wait for a Hello packet before
they determine that the
transmitting router is inactive
ip ospf interface dead
Possible Values [Default]
One or more all (factory
valid IP interface default), or
index numbers current value
all
? (for a list of
selectable
indexes)
1 – 65535 seconds 40 (factory
default), or
current value
555