3Com SuperStack II 9300 Command Reference Manual page 205

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

Fields in the Ethernet Summary Display
Field
actualFlowControl
actualPortMode
autoNegMode
autoNegState
linkStatus
macAddress
noRxBuffers
portLabel
portState
portType
reqFlowControl
reqPortMode
rxBytes
rxErrs
Description
Actual flow control setting. When autonegotiation is
completed, the value is the autonegotiated setting. When
autonegotiation is disabled, the value is the user-selected
flow control value.
Actual operating port mode. When autonegotiation is
completed, the values shown are the autonegotiated
settings. When autonegotiation is disabled, the value is
the user-selected port mode.
Autonegotiation mode configured for port. Possible
values are enable or disable.
Current negotiation state. Possible values are disabled,
configuring, completed, and failed.
Boolean value that indicates the current state of the
physical link for this port (either enabled or disabled).
MAC address of this port.
Number of frames that were discarded because no buffer
space was available.
User-defined label name. The maximum length of the
string is 32 characters, including the null terminator.
Current software operational state of this port. Possible
values are on-line, off-line, partitioned,
tx-fault, and config-error. The value on-line
appears when the port is both enabled and connected to
a cable. The value partitioned appears when the port
has been disabled by the ethernet port monitoring
feature.
Specific description of this port's type. Values for each
port type: 10/100BASE-T(RJ45), 100BASE-FX
(SC), 1000BASE-SX (SC), 1000BASE-LX (GBIC),
1000BASE-SX (GBIC), Backplane (9000).
Configurable parameter that sets the flow control option
(when autonegotiation is disabled). When
autonegotiation is enabled, flow control values are
ignored.
Configurable parameter that sets the port mode on
Ethernet ports that have port mode options (when
autonegotiation is disabled). When autonegotiation is
enabled, port mode values are ignored.
Number of bytes received by this port, including framing
characters.
Total of all receive errors that are associated with this
port.
ethernet summary
205

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents