C
7: E
210
HAPTER
THERNET
P
ORTS
Field
Description
rxByteRate
Average number of bytes received per second by this port
during the most recent sampling period.
rxBytes
Number of bytes received by this port, including framing
characters.
rxDiscards
Number of received frames that were discarded because there
(3500 and 9000
was no higher layer to receive them or because the port was
Layer 3)
disabled.
rxFrameRate
Average number of frames that were received per second by
this port during the most recent sampling period. Sampling
periods are 1 second long and not configurable.
rxFrames
Number of frames that were copied into receive buffers by this
port.
rxInternalErrs
Number of frames that were discarded because of an internal
error during reception.
rxMcastsOnly
Number of multicast frames received by this port.
(3900, 9000
Layer 2, 9300 and
9400)
rxMulticasts
Number of multicast frames that were delivered to a
higher-level protocol or application by this port.
rxPeakByteRate
Peak value of ethernetPortByteReceiveRate for this port since
the station was last initialized.
rxPeakFrameRate
Peak value of ethernetPortFrameReceiveRate for this port since
the station was last initialized.
rxUnicasts
Number of unicast (nonmulticast) frames that were delivered by
this port to a higher-level protocol or application.
singleCollision
Number of frames that have experienced only one collision
(3500, 3900 and
before successful transmission from this port on the second
9000)
attempt.
slot:port
Module slot and port number.
(9000)
txBroadcasts
Number of frames that were queued for transmission from this
(3900, 9000
port by a higher-level protocol or application, including frames
Layer 2, 9300 and
not transmitted successfully.
9400)
txByteRate
Average number of bytes that were transmitted per second by
this port during the most recent sampling period.
txBytes
Number of bytes that were transmitted by this port, including
framing characters.
txDiscards
Number of transmitted frames that were discarded because the
port was disabled.
Need help?
Do you have a question about the SuperStack II 9300 and is the answer not in the manual?
Questions and answers