Bridge Port Address Remove - 3Com SuperStack II 9300 Command Reference Manual

bridge port address
remove
3500
9000
9400
3900
9300
Removes individual MAC addresses from the address table.
Valid Minimum Abbreviation
b po a r
Important Consideration
This command is typically used to remove only static MAC addresses,
because the bridge could relearn a dynamic MAC address shortly after
you remove it.
Options
Prompt Description
VLAN Index numbers of the VLANs to
interface which the desired bridge ports
indexes belong
(only if in
allClosed
mode)
MAC MAC address that you want to
address remove

bridge port address remove

Possible Values [Default]
One or more –
valid VLAN
indexes
all
? (for a list of
selectable
VLANs)
A valid MAC –
address
295