Bridge Packetfilter Assign - 3Com SuperStack II 9300 Command Reference Manual

C 15: P
382
HAPTER ACKET
bridge packetFilter
assign
3500
9000
9400
3900
9300
F
ILTERS
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Assigns a selected packet filter to a port or set of ports (port group).
Valid Minimum Abbreviation
b pa a
Important Considerations
When you assign a packet filter to one or more ports, you must assign
a processing path. The path (transmit all, transmit multicast, receive
all, receive multicast, or receive internal) of a port can have only one
packet filter assigned to it; however, you can assign a single packet
filter to multiple paths and ports.
If you try to assign a filter to a port that already has a filter assigned,
the system displays a warning message and the assignment fails.
After you assign the filter, ports and paths are removed from the list of
possible values (which are listed in the Options table).
Possible values for filters ( n ) depend on the number of created or
loaded filters on the system.
Possible values for bridge ports ( n ) depend on the number of existing
bridge ports on the system.
Options
Prompt
Select filter
Select bridge ports
Description Possible Values
Identifier (id 1 – n
number) of the
? (for a list of valid
filter that you want
filter identifiers)
to assign
Number of the 1 – n
bridge port to
all
which you want to
assign the selected ? (for a list of valid
filter ports)
[Default]
Current valid
selected filter
Current valid
selected bridge
port