3Com SuperStack II 9300 Command Reference Manual page 310

C 11: T
310
HAPTER RUNKS
Prompt Description
Mode Operating mode for the
trunk.
Flow Flow control setting
control (Ethernet only)
Trunk Name of the trunk.
name
Use quotation marks ( ")
around any string with
embedded spaces.
TCMP Trunk Control Message
Protocol (TCMP). Performs
the following functions:
Detects and corrects
trunks that violate
trunk configuration
rules
Ensures orderly
activation and
deactivation of trunk
ports
Procedure
You can define all trunks in one
then reboot. At the end of each trunk definition, the system prompts you
to define another trunk.
1 If you have more than one media type on your system, enter the media
type (for example,
2 Enter the ports that you want to be part of the trunk.
To get information about the selectable ports, enter
3 Enter the correct operating mode for 10/100 Ethernet ports.
If you are configuring a Fast Ethernet trunk, select the Fast Ethernet port
mode ( ,
100half 100full
4 For an Ethernet trunk, enter the flow control setting (
).
txOn
Possible Values
100half, 100full (for Fast
Ethernet)
10half, 10full, 100half,
100full (for platforms that
support 10 Mbps Ethernet)
on
off
rxOn (Gigabit Ethernet)
txOn (Gigabit Ethernet)
Maximum 32 alphanumeric
characters
? (for a list of selectable
names)
enabled
disabled
bridge trunk define
or
Fast_Ethernet Gigabit_Ethernet
).
[Default]
–
off
–
enabled
operation and
).
?
, , , or
on off rxOn