System Display - 3Com SuperStack II 9300 Command Reference Manual

system display

3500
9000
9400
3900
9300
Generates a system configuration display that includes software and
hardware revision numbers, module status information, and warning
messages for certain system conditions.
Valid Minimum Abbreviation
sy d
Important Consideration
A message appears in the display if any module fails a diagnostic test
at start-up.
Fields in the System Display
Field
Diagnostics
Memory size (AP, FP,
Flash, and Buffer)
POV
SysBoot
ExtDiags
Part number
Product number
Rev
Serial number
Slot number
System ID
System name
System up time
Time in service
Type of module
Version, build date, and
time
You configure the system parameters for the CoreBuilder
through the Enterprise Management Engine (EME). See the
CoreBuilder 9000 Enterprise Management Engine User Guide for a
complete list and detailed explanation of the CoreBuilder 9000 system
commands.
Description
Whether a module has passed or failed diagnostics
Memory capacities of the system processors
Power on verification
Boot software revision
Extended diagnostics version number
Each module's 3Com part identification number
Each module's 3Com 3C product identification number
Unique number assigned to the hardware build by 3Com
Each module's unique serial number
Slot position of each hardware module
Unique number that is assigned to the system by 3Com
64-character (maximum) user-defined alphanumeric name
that uniquely identifies the system on your network
Time since the last system reboot
Total operational time since the system was manufactured
Type of physical ports
System software version number, and date and time
when the software was built
system display 69
®
9000 system