Ip Statistics - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide
Hide thumbs Also See for SuperStack II 9300:
Table of Contents

Advertisement

C
16: I
482
HAPTER
NTERNET

ip statistics

3500
9000
9400
3900
9300
P
(IP)
ROTOCOL
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays different types of IP statistics: general statistics and those specific
to the User Datagram Protocol (UDP) or the Internet Control Message
Protocol (ICMP).
Valid Minimum Abbreviation
ip sta
Options
Prompt
Description
Statistics
Type of IP statistics that you want
to display
Fields in the IP Statistics Display
Field
Description
forwDatagrams
Number of datagrams that the IP station tried to forward
fragCreates
Number of IP datagram fragments that were generated as a
result of fragmentation on this system
fragFails
Number of ip datagrams that were discarded because they
needed to be fragmented but could not be (for example,
because their Don't Fragment bit was set)
fragOks
Number of IP datagrams that were successfully fragmented
inAddrErrors
Number of datagrams that the IP station discarded because of
an error in the source or destination IP address
inDelivers
Number of datagrams that the IP station delivered to local IP
client protocols
inDiscards
Number of packet receive discards
inHdrErrors
Number of datagrams that the IP station discarded because
the IP header contained errors
inReceived
Total number of IP datagrams that were received, including
those with errors
osReceives
Number of packets that were received that are destined to
higher-level protocols such as Telnet, DNS, TFTP, and FTP
osTransmits
Number of packets that were sent through the router by
higher-level protocols such as Telnet, DNS, TFTP, and FTP
outDiscards
Number of packet transmit discards
Possible Values
[Default]
ip
ip
udp
icmp
all

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 9000Corebuilder 9400Superstack ii 3900

Table of Contents