Command Information - 3Com SuperStack II 9300 Command Reference Manual

A T G
22
BOUT HIS UIDE
Command
Information
Sample platform list
Each software command has its own description in this guide. Each
command description begins at the top of a page. A command
description begins with these items:
The full command name
Platforms on which this command is valid
Under the command name is a list of 3Com switch platforms. The
command is valid on every platform that has a check mark ( ) next
to it.
3500
9000
9400
3900
9300
A short description of the purpose of the command
Some command descriptions begin with a sentence similar to this one:
"For CoreBuilder 9000: Applies to Layer n switching modules only."
where n is either 2 or 3 . Because the CoreBuilder 9000 system can house
both Layer 2 modules and Layer 3 modules, this sentence alerts you to
the fact that this particular command is valid only on Layer 2 modules or
Layer 3 modules.
The command description continues with one or more of the following
sections:
Valid Minimum Abbreviation — This section lists the shortest
number of characters that you can type to issue the command.
Important Considerations — These usage notes identify potential
problems before you use the command.
Options — If the command begins a configuration process or other
procedure, this section presents each prompt that you see, its
description, the possible values that you can enter, and the default
value.
Fields — If the command prompts the system to display information,
this section lists the display parameters and their definitions.