Bridge Packetfilter Portgroup Create - 3Com SuperStack II 9300 Command Reference Manual

C 15: P
388
HAPTER ACKET
bridge packetFilter
portGroup create
3500
9000
9400
3900
9300
F
ILTERS
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Creates a port group.
Valid Minimum Abbreviation
b pa p c
Important Considerations
You can create up to 32 port groups, one for each bit in the 32-bit
port group mask.
The portGroup create command only creates port group
associations. You must create and assign a filter to a port group to
affect filtering. See "bridge packetFilter create portGroup" and
"bridge packetFilter assign" earlier in this chapter.
Possible values for bridge ports ( n ) depend on the number of bridge
ports on the system.
Options
Prompt Description
Select port Mask that you want to assign
group mask to the port group
Select port Name of the port group that
group name you want to create
Use quotation marks around
any string with embedded
spaces. Use "" to enter an
empty string
Select Number of the bridge port that
bridge port you want to add to the new
group
Possible Values [Default]
1 – 32 –
? (for a list of
masks)
Up to 32 –
alphanumeric
characters
? (for name criteria)
1 – n –
all
? (for a list of valid
ports)