3Com SuperStack II 9300 Command Reference Manual page 195

Procedure
1 From the top level of the Administration Console, enter:
snmp trap addModify
The system displays the list of traps.
2 Enter the IP address of the SNMP manager (destination address).
3 Enter one or more trap numbers for that destination,
list of selectable values.
SNMP Trap addModify Example (3500)
Select menu option (snmp/trap): addModify
Trap Descriptions:
Trap # Description
1 MIB II: Coldstart
2 MIB II: Link Down
3 MIB II: Link Up
4 MIB II: Authentication Failure
5 Bridge MIB: New Root
6 Bridge MIB: Topology Change
7 3C System MIB: System Overtemperature
8 3C System MIB: Power Supply Failure
13 3C System MIB: Address Threshold
14 3C System MIB: System Fan Failure
15 3C FDDI MIB: SMT Hold Condition
16 3C FDDI MIB: SMT Peer Wrap Condition
17 3C FDDI MIB: MAC Duplicate Address Condition
18 3C FDDI MIB: MAC Frame Error Condition
19 3C FDDI MIB: MAC Not Copied Condition
20 3C FDDI MIB: MAC Neighbor Change
21 3C FDDI MIB: MAC Path Change
22 3C FDDI MIB: Port LER Condition
23 3C FDDI MIB: Port Undesired Connection
24 3C FDDI MIB: Port EB Error Condition
25 3C FDDI MIB: Port Path Change
26 RMON MIB: Rising Alarm
27 RMON MIB: Falling Alarm
28 POLL MIB: Response Received
29 POLL MIB: Response Not Received
32 VRRP MIB: New Master
33 VRRP MIB: Authentication Failure
35 QOS MIB: QOS INTRUDER Trap
Enter the trap destination address: 158.102.31.22
Enter the trap numbers to enable (1-8,13-29,32-33,35|all|?)
[1-8,13-29,32-33,35]: 35
snmp trap addModify
, or to get a
all ?
195