Module Nvdata Reset - 3Com SuperStack II 9300 Command Reference Manual

module nvData reset

3500
9000
9400
3900
9300
Resets the module's nonvolatile data (NV) values to the factory defaults.
Valid Minimum Abbreviation
mo nv res
Important Considerations
At times you may want to reset the values to the factory defaults so
that you can reconfigure the module from its original settings.
Resetting the NV data means that all NV memory is set back to the
factory defaults. Before you proceed, be sure that you want to reset
your NV data. Rebooting a module returns you to the Enterprise
Management Engine (EME) prompt, so that you must reconnect to the
module.
Prompts
Prompt Description
Do you wish Confirmation prompt.
to Resetting nonvolatile data may
continue? leave the module in an
inconsistent state; a reboot is
necessary after each reset.
module nvData reset
Possible Values [Default]
n (no) y
y (yes)
139