3Com SuperStack II 9300 Command Reference Manual page 357

Prompt Description
Protocol One or more protocol suites
suite that you want to specify for the
VLAN
(for VLANs
other than
the default)
Modify Whether you want to modify
Layer 3 the Layer 3 information for the
address VLAN
(IP VLAN)
Avoid this mechanism and
instead define multiple IP
interfaces per VLAN with ip
interface define
commands.
Layer 3 Optional fields (IP network and
address and mask) used to set up flood
mask domains for overlapping IP
(IP VLAN) VLAN subnetworks
Per-port Whether you want to modify
tagging the per-port 802.1Q VLAN
tagging. You are prompted to
answer for each port that you
specified.
Tag type Either no tagging or
IEEE 802.1Q tagging (the VID)
VLAN name Unique, user-defined name
that identifies members of the
(for VLANs
VLAN. If you use spaces, put
other than
quotation marks around the
the default)
VLAN name.
bridge vlan modify (3500/9000 Layer 3)
Possible Values
IP
IPX
Apple (for
AppleTalk)
XNS
DECnet
SNA
Vines
X.25
NETBEUI
unspecified
IPX-II
IPX-802.2
IPX-802.3
IPX-802.2-SNAP
(3500 only)
y (yes)
n (no)
Any valid IP
network address
and mask
y (yes)
n (no)
none
802.1Q
Up to 32 ASCII
characters or
spaces
357
[Default]
Current
protocol type
y
Current address
and mask
y
Current tag
type for each
port
Current name