Ip Ospf Areas Modifyrange - 3Com SuperStack II 9300 Command Reference Manual

C 19: O
536
HAPTER PEN
ip ospf areas
modifyRange
3500
9000
9400
3900
9300
S P F (OSPF)
HORTEST ATH IRST
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Modifies an OSPF area range.
Valid Minimum Abbreviation
ip o a modifyr
Options
Prompt Description
Area Index number of the area that
contains the range that you
want to modify
IP address of Existing range that you want to
range modify (in the form of an IP
address)
IP address Range (in the form of an IP
address)
Subnet Subnet mask of the range that
mask you want to modify
Advertise Whether to advertise the area
range range
IP OSPF Areas Modify Range Example
Select area {1-2|?}: 1
Enter IP address of range to modify: 3.3.3.1
Enter IP address [3.3.3.1]: 2.2.2.2
Enter subnet mask [255.0.0.0]: 255.255.0.0
Advertise this area range (yes,no) [yes]: y
Possible Values [Default]
Valid area index –
number
? (for a list of
selectable
indexes)
Up to –
255.255.255.255
Up to Current value
255.255.255.255
Variable, based on Current value
address range class
y (yes) Current value
n (no)