Analyzer Remove - 3Com SuperStack II 9300 Command Reference Manual

C 24: R
760
HAPTER OVING

analyzer remove

3500
9000
9400
3900
9300
A
NALYSIS
Restores the port to be a regular bridge port. Restores the Spanning Tree
state to its state before the port was configured as an analyzer port.
Valid Minimum Abbreviation
an r
Important Considerations
Use this command when you no longer need the bridge port for the
analyzer.
The analyzer port can not be removed if it still has monitor ports.
The port becomes a member of the default virtual LAN (VLAN) when it
is restored (when you remove it as an analyzer port).
The port will not be automatically restored to any VLAN it might have
been a member of before it was configured as an analyzer port — you
must do this yourself.
Options
Prompt Description
Bridge port Number of the bridge port to
which the analyzer is attached
n varies by platform. Only
active analyzer port numbers
are displayed.
Analyzer Remove Example (3500)
Select menu option (analyzer): remove
Select bridge port {2,7|?}: 7
Possible Values [Default]
1 – n –
? (for a list of
available bridge
ports)