3Com SuperStack II 9300 Command Reference Manual page 378

C 15: P
378
HAPTER ACKET
Select menu option (bridge/packetFilter): edit
Select filter {1|?} [1]:
Editing packet filter 1.
Editor Commands
Buffer: list = Ctrl-l
Line:
Cursor: start = Ctrl-a, end = Ctrl-e, left = Ctrl-b, right = Ctrl-f
Insert: line = Enter
Delete: previous = Ctrl-h (BSP), current = Ctrl-d (DEL), line = Ctrl-k
Mode:
Save:
Exit:
Edit buffer has been saved
name
Replace existing filter (n,y) [y]: y
Packet filter 1 has been replaced.
Select menu option (bridge/packetFilter): edit
Select filter {1-2|?} [1]: 1
Editing packet filter 1.
Editor Commands
Buffer: list = Ctrl-l
Line:
Cursor: start = Ctrl-a, end = Ctrl-e, left = Ctrl-b, right = Ctrl-f
Insert: line = Enter
Delete: previous = Ctrl-h (BSP), current = Ctrl-d (DEL), line = Ctrl-k
Mode:
Save:
Exit:
Edit buffer has been saved
name
Replace existing filter (n,y) [y]: n
Store as new filter (n,y) [y]: y
Packet filter 3 stored.
F
ILTERS
Replace Existing Filter Example (3500)
next = Ctrl-n, previous = Ctrl-p
insert/overstrike toggle = Ctrl-o
Ctrl-w
Esc
"rejdiffportgrp"
Store as New Filter Example (3500)
next = Ctrl-n, previous = Ctrl-p
insert/overstrike toggle = Ctrl-o
Ctrl-w
Esc
"BlockGeoB"