Ip Ping - 3Com SuperStack II 9300 Command Reference Manual

ip ping

3500
9000
9400
3900
9300
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Tries to reach or "ping" a specified destination using the default ping
options.
Valid Minimum Abbreviation
ip p
Important Considerations
This tool is useful for network testing, performance measurement,
and management. It uses the ICMP echo facility to send Internet
Control Message Protocol (ICMP) echo request packets to the IP
destination that you specify.
If you need to change the default ping options, use the
option. (The command description for
advancedPing
lists the default ping options.)
advancedPing
You can either supply the host name or IP address as part of the
command string, or you can supply the information at the prompt.
When you specify a host name, the host name and its associated IP
address must be configured on a network name server. Also, you must
add the IP address on the name server to the list of name server
addresses that are associated with the network domain name. See "ip
dns domainName" earlier in this chapter for more information.
When the system sends an echo request packet to an IP station using
ping, the system waits for an ICMP echo reply packet. Possible
responses:
If the host is reachable, the system displays information about the
ICMP reply packets and the response time to the ping.
If the host does not respond, the system displays the ICMP packet
information and this message:
not have configured your gateway IP address.
If the packets cannot reach the host, the system displays the ICMP
packet information and this message:
host is unreachable when there is no route to that host.
To interrupt the command, press Enter.
ip
Host is Not Responding
Host is Unreachable.
ip ping 473
ip
. You may
A