3Com SuperStack II 9300 Command Reference Manual page 185

Prompt
sourceAddress Source address other than the
Interface index Index number of the ICMP source
Numeric mode Whether the system shows hop
Management IP Advanced Trace Route Example (TTL value of 10):
Select menu option (ip): advancedTraceRoute
Enter host IP address [158.101.101.27]:
Enter maximum Time-to-Live (ttl) (1-255) [30]: 10
Enter Destination Port number (30000-65535) [33434]:
Enter the number of probes to be sent at each ttl level (1-10) [3]:
Enter time (sec) to wait for a response (1-10) [3]:
Enter the packet size (bytes) (28-4096) [28]:
Configure TRACEROUTE sourceAddress? (n,y) [y]:
Index
0
1
2
Select interface index {0-2|?} [0]:
Enter Numeric mode (disabled,enabled) [disabled]:
Press "Enter" key to interrupt.
Traceroute to 158.101.101.27: 10 hops max, 28 bytes packet
1 158.101.117.254
2 158.101.112.254
3 158.101.96.22
4 158.101.101.27
management ip advancedTraceRoute
Description
one from which the probe
packets originate. This option is
available if you have more than
one IP interface defined on the
system .
IP address that you want to use.
The system lists defined interfaces
and their indexes.
addresses numerically or
symbolically.
Interface address
Best interface (default)
158.101.117.151
158.101.10.1
12 ms 7 ms
51 ms 9 ms
21 ms 15 ms
18 ms 90 ms
Possible
Values
n (no)
y (yes)
A selectable
interface
disabled
enabled
5 ms
7 ms
6 ms
80 ms
185
[Default]
y
0 (the router
picks the
best
interface)
default