Fddi Station Connectpolicy - 3Com SuperStack II 9300 Command Reference Manual

fddi station
connectPolicy
3500
9000
9400
3900
9300
Sets the connectPolicy attribute string that represents the connection
policies in effect on a station. A connection's type is defined by the types
of the two ports involved in the connection.
Valid Minimum Abbreviation
fd station c
Important Considerations
Port types can be A, B, M, or S.
The system FDDI ports are type A or type B for Dual Attachment
Station (DAS) ports and type M for Single Attachment Station (SAS)
ports.
By default, all connections to the system ports are valid. M-M
connections are accepted so that one CoreBuilder
connected to another system port.
Options
Prompt Description
Ports One or more FDDI station ports
for which you want to set the
connection policies
connectPolicy Bit string that represents the
connection policies in effect on
that station
Bit to Set for Rejecting a Station Connection
This
Connection
Is Rejected If This Bit Is Set
A-A 0
A-B 1
A-S 2

fddi station connectPolicy

Possible Values
Any of the
available ports
on the installed
FDDI modules
all
See next table
Connection Rules
Undesirable peer connection that creates
twisted primary and secondary rings; notify
station management (SMT).
Normal trunk ring peer connection.
Undesirable peer connection that creates a
wrapped ring; notify SMT.
225
® 3500 port can be
[Default]
–
–